Inconel Wave Spring
♦♦♦ Inconel Wave Springs♦♦♦
Vag prentan se yon mens bag ki gen fòm eleman elastik metal ki konpoze de plizyè krèt vag ak fon.Sous vag yo lajman ki itilize nan motè, machin twal, ekipman idwolik, otomobil ak lòt endistri yo.Enstalasyon prensipal la ak espesifikasyon (gwosè nominal) nan chanm kote yo pote yo apwopriye.Oswa nan twou a, espas enstalasyon an piti, epi li gen fonksyon espesyal pou diminye bri ak diminye Vibration.
Dyamèt ekstèn lan varye ant 6mm ak 1000mm.epesè a varye ant 0.4mm ak 5.0mm.
• Materyèl Spring Tanperati segondè:
SUS304,SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,
Inconel X-750,Inconel 718, Nimonic90, Incoloy A286(SUH660)
• Kalite Prentan:
→Konpresyon Springs →Extension Spring
→Torsion Spring →Bending Spring
♦ Vag Spring ♦ ScrollPrentan♦ Disk Spring
♦ Prentan bag ♦ Prentan ki gen fòm espesyal, elatriye
| Kalite Materyèl | Non materyèl | Tanperati maksimòm aplikasyon an°C |
| asye pur | SUS304/SUS316 | 200 |
| SUS631/17-7PH | 370 | |
| SUS632/15-7Mo | 470 | |
| Alyaj prentan asye | 50CrVA | 300 |
| 30W4Cr2VA | 500 | |
| Tanperati segondè nikèl alyaj baz | Incoloy A286(GH2132) | 600 |
| Inconel X-750 (GH4145) | 600 | |
| Inconel 718 (GH4169) | 690 | |
| Nimonic90 (GH4090) | 800 (γ<0.2) | |
| GH4099 | 1000 (γ<0.1) |
♦♦♦ Disc Springs♦♦♦
Yo pwensipalman itilize nan tiyo, bride, anbreyaj, fren, konvètisè koupl, switch wo-vòltaj, boulon pi sere, sipò tiyo, jaden chok ak chok.yo pwodwi an akò ak DIN EN16983 (DIN2093).
Dyamèt ekstèn lan varye ant 6mm ak 1000mm.
Materyèl yo genyen ladan yoalyaj asye 51CrV4, asye kabòn SK85, 1074;
• Nerjaveèi ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;
• Chalè ki reziste asye H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;
• Segondè tanperati ki reziste Nerjaveèi Inconel X750, Inconel X718, Nimonic 90, elatriye.
Pwoteksyon rouye
- Fosfatasyon
- Galvanizasyon mekanik
- Nikèl plake
- Jiaomei
Yo gen karakteristik ti deformation ak gwo chaj.Li gen tou karakteristik sa yo.
- Sous disk ka jwenn karakteristik chaj diferan atravè konbinezon diferan nan envèsyon ak sipèpoze.
- Konpare ak lòt sous dlo, sous dlo disk pran mwens espas.
- Lè plizyè dra yo itilize nan konbinezon, efè a tranpaj ogmante.
- Lè yo itilize rezonab, li pa pral defòme oswa kraze.
- Pi long lavi fatig.
| Materyèl Spring | Tanperati travay | Fòs rupture | Modil elastik KN//mm2 | Chimi% | ||||||||||||||||||
| °C | N/mm2 | RT°C | 100°C | 200°C | 300°C | 400°C | 500°C | 600°C | C | Si | Mn | P | S | Cr | Ni | Lòt moun | ||||||
| T8A SK85 | -50 a +100 | 1200-1800 | 206 | 202 | － | － | － | － | － | 0.80-0.09 | ≤ 0.35 | ≤ 0.50 | ≤ 0.03 | ≤ 0.03 | ≤ 0.20 | ≤ 0.25 | Cu≤0.30 | |||||
| 50CrV4 SUP10 | -50 pou +200 | 1200-1800 | 206 | 202 | 196 | － | － | － | － | 0.47-0.55 | ≤ 0.4 | 0.71.1 | ≤ 0.025 | 0.025 | 0.9 1.2 | ≤ 0.4 | V:0.1 0.25Mo≤ 0.1 | |||||
| C75 | -50 a +100 | 1200-1800 | 206 | 202 | － | － | － | － | － | 0.70-0.80 | 0.15-0.35 | 0.60 0.90 | ≤ 0.025 | 0.025 | ≤ 0.4 | ≤ 0.4 | Mo≤ 0.1 | |||||
| 60Si2Mn SUP6 | -50 pou +200 | 1200-1800 | 206 | 202 | 196 | － | － | － | － | 0.56-0.64 | 1.50-2.0 | 0.6 0.9 | ≤ 0.035 | 0.035 | ≤ 0.35 | ≤ 0.35 | ||||||
| X 10CrNi 18-8 SUS301 | -200 pou +200 | 1150-1500 | 190 | 186 | 180 | － | － | － | － | 0.05-0.15 | ≤ 2.0 | ≤ 2.0 | ≤ 0.045 | 0.015 | 16.0 19.0 | 6.0 9.5 | Mo≤ 0.08 | |||||
| X 5CrNi 18-10SUS304 | -200 pou +200 | 1000-1500 | 185 | 179 | 171 | － | － | － | － | ≤ 0.07 | ≤ 1.0 | ≤ 2.0 | ≤ 0.045 | 0.015 | 17.0 19.5 | 6.0 9.5 | N≤ 0.11 | |||||
| X 5CrNiMo 17-12-2 SUS316 | -200 pou +200 | 1000-1500 | 180 | 176 | 171 | － | － | － | － | ≤ 0.07 | ≤ 1.0 | ≤ 2.0 | ≤ 0.045 | 0.015 | 16.5-18.5 | 10.0 13.0 | Mo:2.0-2.5N≤ 0.11 | |||||
| X 7CrNiAl 17-7 SUS631 | -200 pou +300 | 1150-1700 | 195 | 190 | 180 | 171 | － | － | － | ≤ 0.09 | ≤ 0.7 | ≤ 1.0 | ≤ 0.04 | 0.015 | 16.0 18.0 | 6.5 7.8 | Al: 0.7-1.5 | |||||
| X5CrNiCuNb 16-4 SUS630 | -200 pou +300 | 1150-1700 | 195 | 190 | 180 | 171 | － | － | － | ≤ 0.07 | ≤ 1.0 | ≤ 1.0 | ≤ 0.035 | 0.03 | 15.0 17.0 | 3.0 5.0 | ||||||
| X8CrNiMoAl 15-7-2 | -200 pou +300 | 1150-1700 | 195 | 190 | 180 | 171 | － | － | － | ≤ 0.09 | ≤ 1.0 | ≤ 1.0 | ≤ 0.04 | 0.03 | 14.0 16.0 | 6.5 7.75 | Mo:2.0-3.0Al: 0.75-1.5 | |||||
| Steel X39CrMo 17-1 | -50 pou +400 | 1200-1400 | 215 | 212 | 205 | 200 | 190 | － | － | 0.33-0.45 | ≤ 1.0 | ≤ 1.5 | ≤ 0.04 | 0.03 | 15.5 17.5 | ≤ 1.0 | Mo: 0.7-1.3 | |||||
| X 22CrMoV 12-1 | -50 pou +500 | 1200-1400 | 216 | 209 | 200 | 190 | 179 | 167 | － | 0.18-0.24 | ≤ 0.5 | 0.4 0.9 | ≤ 0.025 | 0.015 | 11 12.5 | 0.3-0.8 | V:0.25-0.35Mo: 0.8-1.2 | |||||
| X30WCrV53 SKD4 | -50 pou +500 | ≥ 1470 | 216 | 209 | 200 | 190 | 179 | 167 | － | 0.25-0.35 | 0.15-0.30 | 0.20 0.40 | ≤ 0.035 | 0.035 | 2.2 2.5 | ≤ 0.35 | V:0.5-0.7 W: 4-5 | |||||
| X40CrMoV5-1 SKD61 | -150 pou +600 | 1650-1990 | 206 | 200 | 196 | 189 | 186 | 158 | － | 0.32 0.40 | 0.8 1.20 | 0.20 0.50 | ≤ 0.030 | 0.030 | 4.75 5.50 | V:0.80-1.20Mo:1.1-.75 | ||||||
| Nikèl Inconel X750 | -200 pou +600 | ≥ 1170 | 214 | 207 | 198 | 190 | 179 | 170 | 158 | ≤ 0.08 | ≤ 0.50 | ≤ 1.0 | ≤ 0.02 | 0.015 | 14.0 17.0 | ≥ 70 | Co≤ 1.0 Ti2.25-2.75 Fe 5.0-9.0 | |||||
| Inconel X718 | -200 pou +600 | ≥ 1240 | 199 | 195 | 190 | 185 | 179 | 174 | 167 | 0.02 0.08 | ≤ 0.35 | ≤ 0.35 | ≤ 0.015 | 0.015 | 17.0 21.0 | 50.0 55.0 | V≤ 1.0Mo: 0.70-1.15 | |||||
| Nimonic 90 | -200 pou +700 | ≥ 1100 | 220 | 216 | 208 | 202 | 193 | 187 | 178 | ≤ 0.13 | ≤ 1.0 | ≤ 1.0 | ≤ 0.03 | 0.015 | 18.0 21.0 | Bal | V15.0-21.0Mo: 2.0-3.0 Al≤ 0.2 | |||||
♦♦♦ Segondè Tanperati Spring Materyèl Karakteristik: ♦♦♦
♦ 304 asye pur
304 asye pur se defòme pa travay frèt amelyore pwopriyete elastik li yo.Li pa ka fè tèt di pa tretman chalè.Li pral pwodwi mayetis pandan travay frèt.304 asye pur gen gwo rezistans korozyon ak bon pwopriyete fizik.
♦316 asye pur
316 Nerjaveèi asye defòme pa travay frèt amelyore pwopriyete elastik li yo, epi yo pa ka fè tèt di pa tretman chalè.Li pral pwodwi mayetis pandan travay frèt.316 asye pur gen molybdène, ki gen pi fò rezistans korozyon pase 304 asye pur, epi li ka reziste korozyon nan aplikasyon chimik.
♦17-7PH (GH631, 0Cr17Ni7Al)
17-7PH menm jan rezistans korozyon ak 304 asye pur, ki ka presipite pa tretman chalè ak presipitasyon redi.Li gen gwo rupture ak fòs sede.Pèfòmans fatig la pi bon pase 304 asye pur ak 65Mn asye kabòn.Li tou gen bon elastisite anba anviwònman ℃.
♦15-7Mo (GH632, 0Cr15Ni7Mo2Al)
15-7MoHas rezistans korozyon menm jan ak 316 asye pur.Li ka presipite pa tretman chalè ak presipitasyon redi.Li gen gwo rupture ak fòs sede, ak pèfòmans fatig li yo pi bon pase 316 asye pur ak 65Mn asye kabòn.Li tou gen bon elastisite anba anviwònman ℃.
♦Inconel X-750 (GH4145)
Inconel X-750 se yon nikèl ki baze sou presipitasyon redi deformation superalloy.Li sitou itilize r'phase kòm aje presipitasyon faz redi.Tanperati rekòmande a se pi ba pase 540 ℃.Alyaj la gen sèten rezistans korozyon ak rezistans oksidasyon, e li gen sèten pèfòmans tanperati ki ba.
♦Inconel 718 (GH4169)
Inconel 718 se yon nikèl ki baze sou presipitasyon redi deformation superalloy.Ranje tanperati rekòmande a se -253--600 ℃.Alyaj la gen gwo fòs anba a 600 ° C, gen bon rezistans fatig, rezistans radyasyon, rezistans oksidasyon ak rezistans korozyon, osi byen ke bon pèfòmans pwosesis ak estabilite estriktirèl alontèm.
♦A-286 (GH2132, SUH660)
Alloy A-286 se yon alyaj fè ki baze sou presipitasyon redi deformation wo-tanperati.Tanperati opere rekòmande a se pi ba pase 540 ℃.Alyaj la gen gwo fòs tanperati wo ak ba ak estabilite alontèm, bon rezistans korozyon ak pèfòmans deformation tèmik, e li gen bon plastisit pwosesis ak pèfòmans soude satisfezan.
